Timken JM624610B Tapered Roller Bearing Cup 180mm x 26mm Tapered Single & Flange

Timken JM624610B Tapered Roller Bearing Cup 180mm x 26mm Tapered Single & Flange

Specifications:

SKU: 11188-2
Condition: New Surplus Manufacturer Packaging
Brand: Timken
Model: JM624610B
Description: Tapered Roller Bearing Cup Tapered Single & Flange

Capacity: 180mm x 26mm

Notes: Specifications
Series
M624600
Cone Part Number
JM624649
Cup Part Number
JM624610-B
Design Unit
Metric
Bearing Weight
3.00 Kg
6.7 lb
Cage Material
Stamped Steel
Full Timken Part Number
M624600
Dimensions
d – Bore
120 mm
4.7244 in
D – Cup Outer Diameter
180 mm
7.0866 in
D1 – Flange Outer Diameter
188.000 mm
7.4016 in
B – Cone Width
36 mm
1.4173 in
C – Cup Width
26.000 mm
1.0236 in
C1 – Cup Flange Width
6.580 mm
0.2591 in
T1 – Bearing Width to Flange
16.350 mm
6.437 in
Abutment and Fillet Dimensions
R – Cone Backface “To Clear” Radius1
3.560 mm
0.14 in
r – Cup Backface “To Clear” Radius2
1.5 mm
0.06 in
da – Cone Frontface Backing Diameter
128 mm
5.04 in
db – Cone Backface Backing Diameter
135 mm
5.31 in
Da – Cup Frontface Backing Diameter
175.01 mm
6.93 in
Ab – Cage-Cone Frontface Clearance
3.3 mm
0.13 in
Aa – Cage-Cone Backface Clearance
3.3 mm
0.13 in
a – Effective Center Location3
0 mm
0 in
Basic Load Ratings
C90 – Dynamic Radial Rating (90 million revolutions)4
64000 N
14400 lbf
C1 – Dynamic Radial Rating (1 million revolutions)5
247000 N
55500 lbf
C0 – Static Radial Rating
377000 N
84700 lbf
Ca90 – Dynamic Thrust Rating (90 million revolutions)6
45300 N
10200 lbf
Factors
K – Factor7
1.41
e – ISO Factor8
0.41
Y – ISO Factor9
1.45
G1 – Heat Generation Factor (Roller-Raceway)
227
G2 – Heat Generation Factor (Rib-Roller End)
61.6
Cg – Geometry Factor10
0.108
1 These maximum fillet radii will be cleared by the bearing corners.
2 These maximum fillet radii will be cleared by the bearing corners.
3 Negative value indicates effective center inside cone backface.
4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
5 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
6 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
7 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
8 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
10 Geometry constant for Lubrication Life Adjustment Factor a3l.

NEO Surplus is not an authorized distributor, representative, reseller, or affiliated with Timken or any manufacturer, brand, or product. Items being sold are not covered under any manufacturer warranty. All trademarks, brand names and brands appearing herein are the property of their respective owners.

We do our best to get all the information in this listing correct. If you see an error or have any questions, please contact us.