Timken 08125 Tapered Roller Bearing Single Cone 1 1/4″ ID x 1.42″ to 1.48″ OD x 0.5937″ Wide

Timken 08125 Tapered Roller Bearing Single Cone 1 1/4″ ID x 1.42″ to 1.48″ OD x 0.5937″ Wide

Specifications:

SKU: 11490-2
Condition: New Surplus Manufacturer Packaging
Brand: Timken
Model: 08125
Description: Tapered Roller Bearing Single Cone

Capacity: 1 1/4″ ID x 1.42″ to 1.48″ OD x 0.5937″ Wide
Origin: USA
UPC: 053893167923

Notes: From MFG:

Specifications
Series
08000
Cone Part Number
08125
Design Units
Imperial
Cage Type
Stamped Steel
C1 – Dynamic Radial Rating (Two-Row, 1 million revolutions)1
12400 lbf
55200 N
C90(2) – Dynamic Radial Rating (Two-Row, 90 million revolutions)2
3220 lbf
14300 N
Dimensions
d – Cone Bore
1 1/4 in
31.750 mm
B – Cone Width
0.5937 in
15.080 mm
Abutment and Fillet Dimensions
R – Cone Backface “To Clear” Radius3
0.04 in
1 mm
da – Cone Frontface Backing Diameter
1.42 in
36 mm
db – Cone Backface Backing Diameter
1.48 in
37.5 mm
Ab – Cage-Cone Frontface Clearance
0.07 in
1.8 mm
Aa – Cage-Cone Backface Clearance
0.02 in
0.5 mm
a – Effective Center Location4
-0.05 in
-1.3 mm
Basic Load Ratings
C90 – Dynamic Radial Rating (90 million revolutions)5
1850 lbf
8220 N
C1 – Dynamic Radial Rating (1 million revolutions)6
7130 lbf
31700 N
C0 – Static Radial Rating
7880 lbf
35000 N
Ca90 – Dynamic Thrust Rating (90 million revolutions)7
1500 lbf
6670 N
Factors
K – Factor8
1.23
G1 – Heat Generation Factor (Roller-Raceway)
10.7
G2 – Heat Generation Factor (Rib-Roller End)
10.6
Cg – Geometry Factor9
0.0601
1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
2 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
3 These maximum fillet radii will be cleared by the bearing corners.
4 Negative value indicates effective center inside cone backface.
5 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
6 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
7 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
8 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
9 Geometry constant for Lubrication Life Adjustment Factor a3l.

*Actual product may vary from images.*

NEO Surplus is not an authorized distributor, representative, reseller, or affiliated with Timken or any manufacturer, brand, or product. Items being sold are not covered under any manufacturer warranty. All trademarks, brand names and brands appearing herein are the property of their respective owners.

We do our best to get all the information in this listing correct. If you see an error or have any questions, please contact us.