IFM Efector OGP280 Retro-reflective Sensor 4m OPG-DPKG/US/CUBE 10-30VDC
Brand: IFM Efector | Model: OGP280 | Condition: New | NEO SKU: 12330-2
Original price was: $100.00.$79.89Current price is: $79.89.
1 in stock
Free Shipping on orders over $50.
*(Domestic only)
Need it fast? Next Day Air available at check out.
Same Day Handling on orders prior to 2pm Eastern Monday – Friday
1 in stock
NEO SKU: 12330-2 | Category: Proximity Sensors
Product Details for New IFM Efector OGP280 Retro-reflective Sensor 4m OPG-DPKG/US/CUBE 10-30VDC:
Condition: New
Brand: IFM Efector
Model: OGP280
Capacity: 4m
EAN: 4021179246910
Country of Origin: Germany
Product Notes
List Price: $109 (1/5/24)
MFG Product Notes
Retro-reflective sensor
OGP280
OGP-DPKG/US/CUBE
Robust rectangular metal housing with M18 thread on the side
Particularly space-saving design for use where space is restricted
Very long range
Ready for operation immediately thanks to fixed setting
Clearly visible LEDs for indicating operation and switching status
Product characteristics
Type of light: red light
Housing: rectangular with M18 thread
Application
System: polarization filter
Function principle: Retro-reflective sensor
Electrical data
Operating voltage [V]: 10…30 DC; (cULus – Class 2 source required)
Rated insulation voltage [V]: 32
Current consumption [mA]: 21
Protection class: III
Reverse polarity protection: yes
Max. power-on delay time [ms]: 300
Type of light: red light
Wave length [nm]: 662
Outputs
Electrical design: PNP
Output function: dark-on mode
Max. voltage drop switching output DC [V]: 2.5
Permanent current rating of switching output DC [mA]: 200
Switching frequency DC [Hz]: 1000
Short-circuit protection: yes
Type of short-circuit protection: yes (non-latching)
Monitoring range
Range referred to prismatic reflector [m]: 0.1…4; (Prismatic reflector Ø 80 E20005)
Max. light spot diameter [mm]: 160
Light spot dimensions refer to: at maximum range
Polarization filter available: yes
Interfaces
Communication interface: IO-Link
Transmission type: COM2 (38,4 kBaud)
IO-Link revision: 1.1
SDCI standard: IEC 61131-9
Profiles: Smart Sensor: Device Identification; Device Diagnosis; Teach Channel; Switching Channel
SIO mode: yes
Required master port class: A
Min. process cycle time [ms]: 2.5
IO-Link process data (cyclical):
Function: bit length
device status: 4
binary switching information: 1
IO-Link functions (acyclical): application specific tag; operating hours counter; switching cycles counter
Supported DeviceIDs
Type of operation: DeviceID
default: 1134
Note: For further information please see the IODD PDF file at “Downloads”
Operating conditions
Ambient temperature [°C]: -25…60
Storage temperature [°C]: -40…60
Protection: IP 65; IP 67
Tests / approvals
EMC: EN 60947-5-2
MTTF [years]: 905
UL approval:
Ta: -25…60 °C
Enclosure type: Type 1
voltage supply: Class 2
File number UL: E174191
Mechanical data
Weight [g]: 58.5
Housing: rectangular with M18 thread
Dimensions [mm]: 52.6 x 19 x 36
Thread designation: M18 x 1
Material: diecast zinc; PEI
Lens material: PMMA
Lens alignment: Side sensing
Displays / operating elements
Display:
Switching status: 1 x LED, yellow
Power: 1 x LED, green
Accessories
Items supplied: lock nut: 1
Remarks
Remarks: cULus – Class 2 source required
Pack quantity: 1 pcs.
Electrical connection
Connection: Connector: 1 x M12; coding: A
MFG Description
IFM Efector provides high-quality sensors and control products, including position sensors, flow sensors, and condition monitoring systems, offering reliable solutions for industrial automation.
MFG URL
For more information about this product or IFM Efector, check out their website: https://ifm.com
Only logged in customers who have purchased this product may leave a review.
Related Products
Additional information
| Weight | 3 lbs |
|---|---|
| Dimensions | 8 × 8 × 7 in |
| Brand | |
| Model | OGP280 |
| Capacity | 4m |
| Origin | Germany |
| Condition | New |
| EAN | 4021179246910 |
Product Details for IFM Efector OGP280 Retro-reflective Sensor 4m OPG-DPKG/US/CUBE 10-30VDC
SKU: 12330-2
Condition: New Surplus Manufacturer Packaging
Brand: IFM Efector
Model: OGP280
Description: Retro-reflective Sensor OPG-DPKG/US/CUBE 10-30VDC
Capacity: 4m
Origin: Germany
EAN: 4021179246910
Notes: List Price: $109 (1/5/24)
Additional MFG Notes on IFM Efector OGP280 Retro-reflective Sensor 4m OPG-DPKG/US/CUBE 10-30VDC:
Retro-reflective sensor
OGP280
OGP-DPKG/US/CUBE
Robust rectangular metal housing with M18 thread on the side
Particularly space-saving design for use where space is restricted
Very long range
Ready for operation immediately thanks to fixed setting
Clearly visible LEDs for indicating operation and switching status
Product characteristics
Type of light: red light
Housing: rectangular with M18 thread
Application
System: polarization filter
Function principle: Retro-reflective sensor
Electrical data
Operating voltage [V]: 10…30 DC; (cULus – Class 2 source required)
Rated insulation voltage [V]: 32
Current consumption [mA]: 21
Protection class: III
Reverse polarity protection: yes
Max. power-on delay time [ms]: 300
Type of light: red light
Wave length [nm]: 662
Outputs
Electrical design: PNP
Output function: dark-on mode
Max. voltage drop switching output DC [V]: 2.5
Permanent current rating of switching output DC [mA]: 200
Switching frequency DC [Hz]: 1000
Short-circuit protection: yes
Type of short-circuit protection: yes (non-latching)
Monitoring range
Range referred to prismatic reflector [m]: 0.1…4; (Prismatic reflector Ø 80 E20005)
Max. light spot diameter [mm]: 160
Light spot dimensions refer to: at maximum range
Polarization filter available: yes
Interfaces
Communication interface: IO-Link
Transmission type: COM2 (38,4 kBaud)
IO-Link revision: 1.1
SDCI standard: IEC 61131-9
Profiles: Smart Sensor: Device Identification; Device Diagnosis; Teach Channel; Switching Channel
SIO mode: yes
Required master port class: A
Min. process cycle time [ms]: 2.5
IO-Link process data (cyclical):
Function: bit length
device status: 4
binary switching information: 1
IO-Link functions (acyclical): application specific tag; operating hours counter; switching cycles counter
Supported DeviceIDs
Type of operation: DeviceID
default: 1134
Note: For further information please see the IODD PDF file at “Downloads”
Operating conditions
Ambient temperature [°C]: -25…60
Storage temperature [°C]: -40…60
Protection: IP 65; IP 67
Tests / approvals
EMC: EN 60947-5-2
MTTF [years]: 905
UL approval:
Ta: -25…60 °C
Enclosure type: Type 1
voltage supply: Class 2
File number UL: E174191
Mechanical data
Weight [g]: 58.5
Housing: rectangular with M18 thread
Dimensions [mm]: 52.6 x 19 x 36
Thread designation: M18 x 1
Material: diecast zinc; PEI
Lens material: PMMA
Lens alignment: Side sensing
Displays / operating elements
Display:
Switching status: 1 x LED, yellow
Power: 1 x LED, green
Accessories
Items supplied: lock nut: 1
Remarks
Remarks: cULus – Class 2 source required
Pack quantity: 1 pcs.
Electrical connection
Connection: Connector: 1 x M12; coding: A
NEO Surplus is not an authorized distributor, representative, reseller, or affiliated with IFM Efector or any manufacturer, brand, or product. Items being sold are not covered under any manufacturer warranty. All trademarks, brand names and brands appearing herein are the property of their respective owners.
We do our best to get all the information in this listing correct. If you see an error or have any questions, please contact us.
FAQ’s
Looking for a replacement IFM Efector OGP280 with fast shipping?
NEO Surplus will ship in stock items the same day if purchased by 2pm ET, Monday – Friday.
What is the HP rating for IFM Efector OGP280?
HP:
NEO Surplus is not an authorized distributor, representative, reseller, or affiliated with IFM Efector or any manufacturer, brand, or product. Items being sold are not covered under any manufacturer warranty. All trademarks, brand names and brands appearing herein are the property of their respective owners.
NEO Surplus buys surplus MRO items and then resells them on the secondary parts markets.
We do our best to get all the information in this listing correct. If you have any questions or see an error, please contact us.
Reviews
There are no reviews yet.