Pepperl+Fuchs WTS10-12/20/105 Diffuse Sensor 2-12mm 200958 Copper Welding-Electrode

Pepperl+Fuchs WTS10-12/20/105 Diffuse Sensor 2-12mm 200958 Copper Welding-Electrode

Specifications:

SKU: 11485-2
Condition: New Surplus Manufacturer Packaging
Brand: Pepperl+Fuchs
Model: WTS10-12/20/105
Description: Diffuse Sensor 200958 Copper Welding-Electrode

Capacity: 2-12mm
Origin: Germany

Notes: From MFG:

Specifically for quality checks on welding caps
Upper and lower welding caps checked simultaneously
High position and angle tolerance insensitivity of the welding cap
Stability alarm indication
Scratch resistant mineral glass lens

General specifications
Detection range 2 … 12 mm
Reference target Copper welding-electrode Diameter: 16 mm , Front end: 6 mm
Light source LED
Light type modulated visible red light , 640 nm
Ambient light limit continuous light 40000 Lux , Modulated light 5000 Lux
Tilting angle ± 1.5 °
Position tolerance ± 2 mm
Indicators/operating means
Operation indicator LED green: Power on
Function indicator LED yellow: switching state
LED red: Stability alarm indicator
Teach-In indicator LED, green/yellow flashing (approx. 4 Hz)
Teach Error:LED green/yellow non equiphase flashing; 8.0 Hz
Control elements Teach-In key
Electrical specifications
Operating voltage 10 … 30 V DC
No-load supply current ≤ 70 mA
Output
Switching type light-on
Signal output 2 switch outputs PNP, NO short-circuit protected reverse polarity protected
Switching current max. 100 mA
Switching frequency 100 Hz
Response time 5 ms
Conformity
Product standard EN 60947-5-2
Compliance with standards and directives
Standard conformity
Shock and impact resistance IEC / EN 60068. half-sine, 50 g in each X, Y and Z directions
Vibration resistance IEC / EN 60068-2-6. Sinus. 10 -150 Hz, 5 g in each X, Y and Z directions
Approvals and certificates
Protection class II, rated voltage ≤ 250 V AC with pollution degree 1-2 according to IEC 60664-1
UL approval cULus Listed
CCC approval CCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature 0 … 50 °C (32 … 122 °F)
The switching accuracy will remain, if the temperature after Teach-In does not varies more than ±7 °C
Storage temperature -20 … 70 °C (-4 … 158 °F)
Mechanical specifications
Degree of protection IP67
Connection 5-pin, M12 x 1 connector
Material
Housing PC + ABS
Optical face Scratch resistant mineral glass lens
Mass 80 g
Classifications
System Classcode
ECLASS 13.0 27270903
ECLASS 11.0 27270903
ECLASS 10.0.1 27270903
ECLASS 9.0 27270903
ECLASS 8.0 27270903
ECLASS 5.1 27270903
ETIM 9.0 EC001821
ETIM 8.0 EC001821
ETIM 7.0 EC001821
ETIM 6.0 EC001821
ETIM 5.0 EC001821
UNSPSC 12.1 39121528

*Actual product may vary from images.*

NEO Surplus is not an authorized distributor, representative, reseller, or affiliated with Pepperl+Fuchs or any manufacturer, brand, or product. Items being sold are not covered under any manufacturer warranty. All trademarks, brand names and brands appearing herein are the property of their respective owners.

We do our best to get all the information in this listing correct. If you see an error or have any questions, please contact us.