Timken 3876 Tapered Roller Bearing 1-1/2″ ID 1.1875″ Cone Width 20024

Specifications:

SKU: 11336-2
Condition: New Surplus Manufacturer Packaging
Brand: Timken
Model: 3876
Description: Tapered Roller Bearing 20024
ID: 1-1/2″

Capacity: 1.1875″ Cone Width
Origin: USA
UPC: 053893134413

Notes: From MFG:

This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.

Specifications
Series
3800
Cone Part Number
3876
Design Units
Imperial
Cage Type
Stamped Steel
C1 – Dynamic Radial Rating (Two-Row, 1 million revolutions)1
48600 lbf
216000 N
C90(2) – Dynamic Radial Rating (Two-Row, 90 million revolutions)2
12600 lbf
56100 N
Dimensions
d – Cone Bore
1 1/2 in
38.1 mm
B – Cone Width
1.1875 in
30.163 mm
Abutment and Fillet Dimensions
R – Cone Backface “To Clear” Radius3
0.14 in
3.600 mm
da – Cone Frontface Backing Diameter
1.91 in
48.5 mm
db – Cone Backface Backing Diameter
2.17 in
55 mm
Ab – Cage-Cone Frontface Clearance
0.11 in
2.8 mm
Aa – Cage-Cone Backface Clearance
0.04 in
1 mm
a – Effective Center Location4
-0.32 in
-8.1 mm
Basic Load Ratings
C90 – Dynamic Radial Rating (90 million revolutions)5
7240 lbf
32200 N
C1 – Dynamic Radial Rating (1 million revolutions)6
27900 lbf
124000 N
C0 – Static Radial Rating
33200 lbf
148000 N
Ca90 – Dynamic Thrust Rating (90 million revolutions)7
4980 lbf
22200 N
Factors
K – Factor8
1.45
Cg – Geometry Factor9
0.0873
1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
2 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
3 These maximum fillet radii will be cleared by the bearing corners.
4 Negative value indicates effective center inside cone backface.
5 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
6 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
7 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
8 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
9 Geometry constant for Lubrication Life Adjustment Factor a3l.

NEO Surplus is not an authorized distributor, representative, reseller, or affiliated with Timken or any manufacturer, brand, or product. Items being sold are not covered under any manufacturer warranty. All trademarks, brand names and brands appearing herein are the property of their respective owners.

We do our best to get all the information in this listing correct. If you see an error or have any questions, please contact us.