Timken 39590 39520 Tapered Roller Bearing 0921745 Outer Ring Cone

Specifications:

SKU: 11545-2
Condition: New Surplus Manufacturer Packaging
Brand: Timken
Model: 39590 39520
Description: Tapered Roller Bearing 0921745 Outer Ring Cone

Origin: Brazil

Notes: From MFG:

Specifications
Series
39500
Cone Part Number
39590
Cup Part Number
39520
Design Unit
Inch
Cage Material
Stamped Steel
Dimensions
d – Bore
2.6250 in
66.675 mm
D – Cup Outer Diameter
4.4375 in
112.713 mm
B – Cone Width
1.1875 in
30.163 mm
C – Cup Width
0.9375 in
23.813 mm
T – Bearing Width
1.1875 in
30.163 mm
Abutment and Fillet Dimensions
R – Cone Backface “To Clear” Radius1
0.14 in
3.600 mm
r – Cup Backface “To Clear” Radius2
0.13 in
3.3 mm
da – Cone Frontface Backing Diameter
2.95 in
75 mm
db – Cone Backface Backing Diameter
3.23 in
82.0 mm
Da – Cup Frontface Backing Diameter
4.25 in
107.95 mm
Db – Cup Backface Backing Diameter
3.98 in
101.09 mm
Ab – Cage-Cone Frontface Clearance
0.13 in
3.3 mm
Aa – Cage-Cone Backface Clearance
0.05 in
1.3 mm
a – Effective Center Location3
-0.26 in
-6.6 mm
Basic Load Ratings
C90 – Dynamic Radial Rating (90 million revolutions)4
9730 lbf
43300 N
C1 – Dynamic Radial Rating (1 million revolutions)5
37500 lbf
167000 N
C0 – Static Radial Rating
50300 lbf
224000 N
Ca90 – Dynamic Thrust Rating (90 million revolutions)6
5650 lbf
25100 N
Factors
K – Factor7
1.72
e – ISO Factor8
0.34
Y – ISO Factor9
1.77
G1 – Heat Generation Factor (Roller-Raceway)
84.3
G2 – Heat Generation Factor (Rib-Roller End)
23.7
Cg – Geometry Factor10
0.107
1 These maximum fillet radii will be cleared by the bearing corners.
2 These maximum fillet radii will be cleared by the bearing corners.
3 Negative value indicates effective center inside cone backface.
4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
5 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
6 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
7 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
8 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
10 Geometry constant for Lubrication Life Adjustment Factor a3l.

*Actual product may vary from images.*

NEO Surplus is not an authorized distributor, representative, reseller, or affiliated with Timken or any manufacturer, brand, or product. Items being sold are not covered under any manufacturer warranty. All trademarks, brand names and brands appearing herein are the property of their respective owners.

We do our best to get all the information in this listing correct. If you see an error or have any questions, please contact us.