Timken L44649 Tapered Roller Bearing 1-1/16″ ID 1.98″ OD 0.56″ Wide Cone

Timken L44649 Tapered Roller Bearing 1-1/16″ ID 1.98″ OD 0.56″ Wide Cone

Specifications:

SKU: 11651-2
Condition: New Surplus Manufacturer Packaging
Brand: Timken
Model: L44649
Description: Tapered Roller Bearing Cone
ID: 1-1/16″
OD: 1.98″
Wide: 0.56″

UPC: 053893294889

Notes: From MFG:

Specifications
Series
L44600
Cone Part Number
L44649
Cup Part Number
L44610
Design Unit
Inch
Cage Material
Stamped Steel
Dimensions
d – Bore
1 1/16 in
26.988 mm
D – Cup Outer Diameter
1.9800 in
50.292 mm
B – Cone Width
0.5800 in
14.732 mm
C – Cup Width
0.4200 in
10.668 mm
T – Bearing Width
0.5600 in
14.224 mm
Abutment and Fillet Dimensions
R – Cone Backface “To Clear” Radius1
0.14 in
3.560 mm
r – Cup Backface “To Clear” Radius2
0.05 in
1.27 mm
da – Cone Frontface Backing Diameter
1.22 in
31 mm
db – Cone Backface Backing Diameter
1.48 in
37.5 mm
Da – Cup Frontface Backing Diameter
1.87 in
47.50 mm
Db – Cup Backface Backing Diameter
1.75 in
44.45 mm
Ab – Cage-Cone Frontface Clearance
0.05 in
1.3 mm
Aa – Cage-Cone Backface Clearance
0.02 in
0.5 mm
a – Effective Center Location3
-0.13 in
-3.3 mm
Basic Load Ratings
C90 – Dynamic Radial Rating (90 million revolutions)4
2080 lbf
9230 N
C1 – Dynamic Radial Rating (1 million revolutions)5
8010 lbf
35600 N
C0 – Static Radial Rating
7400 lbf
32900 N
Ca90 – Dynamic Thrust Rating (90 million revolutions)6
1330 lbf
5910 N
Factors
K – Factor7
1.56
e – ISO Factor8
0.37
Y – ISO Factor9
1.6
G1 – Heat Generation Factor (Roller-Raceway)
8.9
G2 – Heat Generation Factor (Rib-Roller End)
8.93
Cg – Geometry Factor10
0.0526
1 These maximum fillet radii will be cleared by the bearing corners.
2 These maximum fillet radii will be cleared by the bearing corners.
3 Negative value indicates effective center inside cone backface.
4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
5 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
6 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
7 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
8 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
10 Geometry constant for Lubrication Life Adjustment Factor a3l.

*Actual product may vary from images.*

NEO Surplus is not an authorized distributor, representative, reseller, or affiliated with Timken or any manufacturer, brand, or product. Items being sold are not covered under any manufacturer warranty. All trademarks, brand names and brands appearing herein are the property of their respective owners.

We do our best to get all the information in this listing correct. If you see an error or have any questions, please contact us.