Pro-Face SP-5B10/PFXSP5B10 Power Box Module High-Speed Processing HMI SP5000 Series
Specifications:
Condition: New Other: See Notes
Condition Notes: No Box, no signs of being installed
Brand: Pro-Face
Model: SP-5B10/PFXSP5B10
MPN: none
Series: | Revision: | Firmware:
Description: Power Box Module High-Speed Processing HMI SP5000 Series
Electrical
Input Volts: 12, VDC
Input Watts: 20, W
Origin: China
Notes: From MFG:
Standard product information
Family HMI
Series SP5000 Series
Size Box (Power)
Model PFXSP5B10
Global Code PFXSP5B10
Product Features Box Module High-speed processing (Power Box)
Repair Status ✔ (Maintenance service is available, able to be maintained.)
Electrical specifications
Rated input voltage 12 Vdc (Supply from Display Module or DC Power Supply Adapter for Box Module “PFXZCDADEXP1”)
Power consumption Max. 25 W
When power is not supplied to external devices: 12.5 W or less*1
Noise immunity Noise Voltage : 1,000 Vp-p
Pulse Duration : 1 µs
Rise Time : 1 ns
(via noise simulator)
1
Power consumption for Box Module only
Environmental specifications
International safety standards CE, UKCA, UL,cUL (508) Listed, ANSI/CSA (UL508+1604) Listed, ATEX, IECEx, CCC, KCs, NEPSI, Marine DNV-GL, Marine ABS, Marine RINA, Marine BV, Marine ClassNK, Marine LR, Marine CCS, EAC, KC, C-Tick
Surrounding air temperature 0 to 60 °C [32 to 140 °F]
Storage temperature -20 to +60 °C [-4 to 140 °F]
Ambient humidity 10 to 90 % RH (Wet bulb temperature: 39 °C [102.2 °F] max. – no condensation)
Storage humidity 10 to 90 % RH (Wet bulb temperature: 39 °C [102.2 °F] max. – no condensation)
Dust 0.1 mg/m3 (10-7 oz/ft3) or less (non-conductive levels)
Pollution degree For use in Pollution Degree 2 environment
Corrosive gases Free of corrosive gases
Air pressure (altitude range) 800 to 1,114 hPa (2,000 m [6,561 ft.] above sea level or less)
Vibration resistance IEC/EN 61131-2 compliant
5 to 9 Hz single amplitude 3.5 mm [0.14 in.]
9 to 150 Hz fixed acceleration: 9.8 m/s2
X, Y, Z directions for 10 cycles (approx. 100 min.)
Concussion resistance IEC/EN 61131-2 compliant 147 m/s2, X, Y, Z directions for 3 times
Electrostatic discharge immunity Contact Discharge Method: 6 kV
Air Discharge Method: 8 kV
(IEC/EN61000-4-2 Level 3)
Memory
Application memory When using GP-Pro EX:
– Media: SD Card
– Screen Area: 64MB *Use the screen area when the user font area’s capacity is exceeded – for example, when an image font or a picture font is used.
– User Font Area: 8MB
– Logic Program Area: 132KB (Equivalent to 15,000 steps) *Up to 60,000 steps can be converted in software. However, this reduces application memory capacity (for screen data) by 1 MB.
– Free Space: None
Removable System: Yes
Backup memory When using GP-Pro EX:
– Screen Area: NVRAM 320KB
– Variable Area: NVRAM 64KB
Battery: None*1
1
SP5000 Series can retain NVRAM (backup memory) and RTC (clock data) without any batteries. But, when no power is supplied for 100 days or more, it’s necessary to additionally mount this option item to retain RTC (clock data).
Interface specifications
Serial (COM1) Asynchronous Transmission: RS-232C / 422 / 485, Data Length: 7 or 8 bits, Stop Bit: 1 or 2 bits, Parity: None, Even or Odd, Data Transmission Speed: 2,400 (1,200) to 115,200 bps, Connector: D-Sub 9 pin (plug)
Serial (COM2) Asynchronous Transmission: RS-232C / 422 / 485, Data Length: 7 or 8 bits, Stop Bit: 1 or 2 bits, Parity: None, Even or Odd, Data Transmission Speed: 2,400 (1,200) to 115,200 bps, 187,500 bps (MPI), Connector: D-Sub 9 pin (plug)
USB (Type A) Conforms to USB 2.0 (Type A) x 2
Power supply voltage: 5 Vdc ±5 %
Output Current: 500 mA/port
Communication distance: 5 m [16.4 ft.]*1
USB (mini-B) Conforms to USB 2.0 (mini-B) x 1, Communication Distance: 5 m [16.4 ft] or less
Ethernet IEEE802.3i / IEEE802.3u / IEEE802.3ab, 10BASE-T / 100BASE-TX / 1000BASE-T, Connector: Modular jack (RJ-45) x 2
SD card SD Card Slot (System) x 1
SD Card Slot (Storage) x 1
Expansion unit Fieldbus Unit x 1
Sound output Speaker Output: 300mW or more (Rated Load: 8Ω, Frequency: 1kHz), LINE Output: 1.4Vp-p (Rated load: 10kΩ), Connector: 2-piece terminal block (AUX) x 1
AUX output Alarm Output or Buzzer Output x 1
Rated Voltage: 24 Vdc, Rated Current: 50 mA or less
Connector: 2-piece terminal block (AUX) x 1
1
When using the Display Module with the Power Box, you can connect only one of each type of USB device, such as one USB flash drive, one transfer cable, or one barcode reader. If you connect multiple devices that are the same type, only the first device will work.
Structural specifications
Cooling method Natural air circulation
External dimensions W188 x H131 x D35 mm [W7.40 x H5.16 x D1.38 in.]
Weight 0.9 kg [1.98 lb] or less*1
1
Box module only.
Looking for a replacement Pro-Face SP-5B10/PFXSP5B10 with fast shipping?
NEO Surplus will ship in stock items the same day if purchased by 2pm eastern, Monday – Friday.
You can buy with confidence!
NEO Surplus offers a 30 day return.
Want to learn more about our terms?
See terms for more details.
Do you want to sell a Pro-Face SP-5B10/PFXSP5B10 Power Box Module High-Speed Processing HMI SP5000 Series to us? Contact us today!
What are the Electrical specs for Pro-Face SP-5B10/PFXSP5B10?
The Electrical specs are: Input Volts: 12, VDC, Input Watts: 20, W,
NEO Surplus is not an authorized distributor, representative, reseller, or affiliated with Pro-Face or any manufacturer, brand, or product.
Items being sold are not covered under any manufacturer warranty.
All trademarks, brand names and brands appearing herein are the property of their respective owners.
Thank you for checking out our Pro-Face SP-5B10/PFXSP5B10. If you have any questions on the Pro-Face SP-5B10/PFXSP5B10 please let us know.
We do our best to get all the information in this listing correct. If you see an error, please let us know.
