Keyence FS-V31P Digital Fiber Optic Sensor UK CA 00931PK #8T120104
Specifications:
Condition: New
Brand: Keyence
Model: FS-V31P
MPN: none
Series: | Revision: | Firmware:
Description: Digital Fiber Optic Sensor UK CA 00931PK #8T120104
Origin: Japan
Notes: Specifications
Model
FS-V31P
Type
1-output with cable
Output
PNP
Main unit/Expansion unit
Main unit
Control output
1 output
Monitor output (1 to 5 V)
N/A
External input
Connector
―
Light source LED
Red, 4-element LED (Wavelength: 640 nm)
Response time
33 µs (HIGH SPEED) /250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER TURBO) /4 ms (ULTRA TURBO) /16 ms (MEGA TURBO)
Output selection
LIGHT-ON/DARK-ON (switch-selectable)
Display indicator
Operation indicator: Red LED/Dual digital monitor: Dual 7-segment display, Preset Value (4-digit green LED indicator) and
Current Value (4-digit red LED indicator) illuminated together. Current Value range: 0 to 64,512; Excess gain: 0P to 999P,
Hold function: Possible to display both peak and bottom hold values, Selectable from 5 variations
Bar LED monitor: Excess gain displayed (85% to 115% in 7 steps), Scaling display
Size
30.3 mm (H) x 9.8 mm (W) x 71.8 mm (D) 1.19″ (H) x 0.39″ (W) x 2.83″ (D)
Detection mode
Light intensity (area detection possible, automatic sensitivity-tracking function provided)
Timer function
OFF-delay timer/ON-delay timer/One-shot timer/ON-delay timer + OFF-delay timer/ON-delay timer + One-shot timer, selectable
Timer duration selectable: 0.1 ms to 9,999 ms, Maximum error against the setting value: ±10% max.
Control output
PNP open-collector 24 V, 100 mA max.*1 (main unit only)/20 mA max. (when the expansion unit(s) is connected), Residual voltage: 1 V max.
External inputy
Input time: 2 ms (ON)/20 ms (OFF) min.*2
Unit expansion
Up to 16 expansion units can be connected (a total of 17 units). Note that the 2-output type should be counted as two units.
Number of interference prevention units
Normal operation
HIGHSPEED：0 FINE：4 TURBO/SUPER/ULTRA/MEGA：8台
Rating
Power voltage
12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less
Power consumption
Normal: 750 mW max. (Using 24 V, 31 mA max., using 12 V, 40 mA max.)/
Power saving 580 mW max. (Using 24 V, 24 mA max., using 12 V,
28 mA max.)*3
Environmental resistance
Ambient light
Incandescent lamp: 20,000 lux max., Sunlight: 30,000 lux max.
Ambient temperature
-10 to +55 °C 14 to 131 °F (No freezing)*4
Relative humidity
35 to 85 % RH (No condensation)
Vibration resistance
10 to 55 Hz, Double amplitude 1.5 mm 0.06″, 2 hours in each of the X, Y, and Z directions
Shock resistance
500 m/s2, 3 times in each of the X, Y, and Z directions
Case material
Polycarbonate
Accessories
N/A
Weight
Approx. 80 g
*1 Total current of two outputs should be less than 100 mA.
*2 Only available on certain models.
*3 When using the HIGH SPEED mode, the power consumption increases by 160 mW (7 mA).
*4 If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less.
1 to 2 Units: -10 to +55 °C 14 to 131 °F, 3 to 10 Units: -10 to +50 °C 14 to 122 °F, 11 to 16 Units: -10 to +45 °C 14 to 113 °F
Looking for a replacement Keyence FS-V31P with fast shipping?
NEO Surplus will ship in stock items the same day if purchased by 2pm eastern, Monday – Friday.
You can buy with confidence!
NEO Surplus offers a 30 day return.
Want to learn more about our terms?
See terms for more details.
Do you want to sell a Keyence FS-V31P Digital Fiber Optic Sensor UK CA 00931PK #8T120104 to us? Contact us today!
NEO Surplus is not an authorized distributor, representative, reseller, or affiliated with Keyence or any manufacturer, brand, or product.
Items being sold are not covered under any manufacturer warranty.
All trademarks, brand names and brands appearing herein are the property of their respective owners.
Thank you for checking out our Keyence FS-V31P. If you have any questions on the Keyence FS-V31P please let us know.
We do our best to get all the information in this listing correct. If you see an error, please let us know.
