Keyence SR-752 Ethernet Compatible Code Reader KCC-REM-KEY-1169A 24VDC 220mA 2D

Specifications:

SKU: 12660-6
Condition: Used
Brand: Keyence
Model: SR-752
MPN: KCC-REM-KEY-1169A
Description: Ethernet Compatible Code Reader 2D

Electrical
Input Volts: 24VDC
Input Amps: 220mA

Origin: Japan

Additional MFG Notes on Keyence SR-752 Ethernet Compatible Code Reader KCC-REM-KEY-1169A 24VDC 220mA 2D:
Specifications

Model: SR-752
Type: Long-range type

Receiver
Sensor: CMOS Image Sensor
Number of pixels: 752 x 480 pixels

Lighting
Light source: Red LED
Laser pointer: Visible semiconductor laser, Wavelength 660 nm
Output: 60 µW
Pulse duration: 200 µs
Laser class: Class 1 Laser Product (IEC60825-1, FDA (CDRH) Part 1040.10*1)

Reading specifications

Minimum resolution
2D:
0.19 mm 0.007″
0.33 mm 0.013″ (When SR-75L4 is mounted)
0.5 mm 0.02″ (When SR-75L6 is mounted)

Barcode:
0.17 mm 0.007″
0.22 mm 0.009″ (When SR-75L4 is mounted)
0.33 mm 0.013″ (When SR-75L6 is mounted)

Supported symbol
2D: QR, MicroQR, DataMatrix (ECC200), GS1 DataMatrix, PDF417, MicroPDF, Composite Code (CC-A, CC-B, CC-C)
Barcode: GS1DataBar,CODE39,ITF,NW-7 (Codabar),CODE128,GS1-128,JAN/EAN/UPC,CODE39 FullASCII, CODE93,2of5 (Industrial 2of5),COOP 2of5,Trioptic CODE39

Reading distance (typical examples)
DataMatrix QR:

180 to 305 mm 7.09″ to 12.01″
(Cell size = 0.5 mm 0.02″)
300 to 490 mm 11.81″ to 19.29″
(Cell size = 0.5 mm 0.02″) (When SR-75L4 is mounted)
460 to 690 mm 18.11″ to 27.17″
(Cell size = 0.5 mm 0.02″) (When SR-75L6 is mounted)

Barcode:

180 to 330 mm 7.09″ to 12.99″
(Narrow bar width = 0.5 mm 0.02″)
250 to 540 mm 9.84″ to 21.26″
(Narrow bar width = 0.5 mm 0.02″) (When SR-75L4 is mounted)
400 to 760 mm 15.75″ to 29.92″
(Narrow bar width = 0.5 mm 0.02″) (When SR-75L6 is mounted)

Focal distance:
250 mm 9.84″
400 mm 15.75″ (When SR-75L4 is mounted)
600 mm 23.62″ (When SR-75L6 is mounted)

Field of view (at focal distance):
65.0 x 41.5 mm 2.56″ x 1.63″
108 x 69 mm 4.25″ x 2.72″ (When SR-75L4 is mounted)
165 x 106 mm 6.50″ x 4.17″ (When SR-75L6 is mounted)

I/O specifications

Control input
Number of inputs: 2
Input type: Bidirectional voltage input
Maximum rating: 26.4 VDC
Minimum ON voltage: 15 VDC
Maximum OFF current: 0.2 mA or less

Control output
Number of outputs: 3
Output type: Photo MOS relay output
Maximum rating: 30 VDC
Maximum load current: 1 output: 50 mA or less, Total of 3 outputs: 100 mA or less
Leakage current when OFF: 0.1 mA or less
Residual voltage when ON: 1 V or less

Ethernet
Communication standard: 10BASE-T/100BASE-TX
Supported protocol: TCP/IP, FTP, SNTP, BOOTP, EtherNet/IPⓇ*2, PROFINET*3, MC protocol, KV STUDIO

Serial communication
Communication standard: RS-232C compliant
Transmission speed: 9600, 19200, 38400, 57600, 115200 bps
Supported protocol: Non-procedural, MC protocol, SYSWAY, KV STUDIO

Rating
Power voltage: Control port: 24 VDC ±10 % or Ethernet port: PoE TypeA/B 36 to 57 V (Cannot supply at the same time)*4
Current consumption: Control port: 220 mA (When 24 VDC power supply is used) Ethernet port: PoE Power Class 2*5

Environmental resistance
Enclosure rating: IP65
Ambient light: Sunlight: 10,000 lux, Incandescent lamp: 6,000 lux, Fluorescent lamp: 2,000 lux
Ambient temperature: 0 to +45 °C 32 to 113 °F
Storage temperature: -10 to +50 °C 14 to 122 °F
Relative humidity: 35 to 95 % RH (No condensation)
Storage relative humidity: 35 to 95 % RH (No condensation)
Operating environment: No dust or corrosive gases present
Vibration resistance: 10 to 55 Hz, Double amplitude 1.5 mm 0.06″, 55 to 500 Hz, Acceleration 5G, 3 hours in each of the X, Y, and Z directions

Weight: Approx. 175 g Approx. 185 g (When SR-75L4/L6 is mounted)

*1 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50.
*2 EtherNet/IPⓇ is a trademark or registered trademark of ODVA.
*3 PROFINET is a trademark or registered trademark of PROFIBUS International.
*4 To comply with CSA No.61010-1/UL61010-1/IEC61010-1, use a power supply meeting the following criteria:
– provides Class 2 output as defined in the CEC and NEC, or
– evaluated as a Limited Power Source as defined in CAN/CSA-C22.2 No.60950-1/UL60950-1/IEC60950-1.
*5 Peak operating current for PoE Power Class 2: 210 mA maximum.

NEO Surplus is not an authorized distributor, representative, reseller, or affiliated with Keyence or any manufacturer, brand, or product. Items being sold are not covered under any manufacturer warranty. All trademarks, brand names and brands appearing herein are the property of their respective owners.

We do our best to get all the information in this listing correct. If you see an error or have any questions, please contact us.