Timken 13687 Tapered Roller Bearing 1 1/2″ ID x 1.75″ to 1.89″ OD x .7500″ Wide

Timken 13687 Tapered Roller Bearing 1 1/2″ ID x 1.75″ to 1.89″ OD x .7500″ Wide

Specifications:

SKU: 11493-2
Condition: New Surplus Manufacturer Packaging
Brand: Timken
Model: 13687
Description: Tapered Roller Bearing

Capacity: 1 1/2″ ID x 1.75″ to 1.89″ OD x .7500″ Wide
Origin: USA
UPC: 053893178950

Notes: From MFG:

Specifications
Series
13600
Cone Part Number
13687
Design Units
Imperial
Cage Type
Stamped Steel
C1 – Dynamic Radial Rating (Two-Row, 1 million revolutions)1
26300 lbf
117000 N
C90(2) – Dynamic Radial Rating (Two-Row, 90 million revolutions)2
6820 lbf
30300 N
Dimensions
d – Cone Bore
1 1/2 in
38.1 mm
B – Cone Width
0.7500 in
19.050 mm
Abutment and Fillet Dimensions
R – Cone Backface “To Clear” Radius3
0.08 in
2 mm
da – Cone Frontface Backing Diameter
1.75 in
44.5 mm
db – Cone Backface Backing Diameter
1.89 in
48 mm
Ab – Cage-Cone Frontface Clearance
0.05 in
1.3 mm
Aa – Cage-Cone Backface Clearance
0.02 in
0.5 mm
a – Effective Center Location4
-0.12 in
-3 mm
Basic Load Ratings
C90 – Dynamic Radial Rating (90 million revolutions)5
3920 lbf
17400 N
C1 – Dynamic Radial Rating (1 million revolutions)6
15100 lbf
67200 N
C0 – Static Radial Rating
15300 lbf
67900 N
Ca90 – Dynamic Thrust Rating (90 million revolutions)7
2700 lbf
12000 N
Factors
K – Factor8
1.45
G1 – Heat Generation Factor (Roller-Raceway)
20.7
G2 – Heat Generation Factor (Rib-Roller End)
10.9
Cg – Geometry Factor9
0.0713
1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
2 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
3 These maximum fillet radii will be cleared by the bearing corners.
4 Negative value indicates effective center inside cone backface.
5 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
6 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
7 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
8 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
9 Geometry constant for Lubrication Life Adjustment Factor a3l.

*Actual product may vary from images.*

NEO Surplus is not an authorized distributor, representative, reseller, or affiliated with Timken or any manufacturer, brand, or product. Items being sold are not covered under any manufacturer warranty. All trademarks, brand names and brands appearing herein are the property of their respective owners.

We do our best to get all the information in this listing correct. If you see an error or have any questions, please contact us.