Timken LM11910 Single Cup LM11910-20024

Timken LM11910 Single Cup LM11910-20024

Specifications:

SKU: 12630-2
Condition: New Surplus Manufacturer Packaging
Brand: Timken
Model: LM11910
MPN: LM11910-20024
Description: Single Cup

Origin: USA
UPC: 053893173795

*Actual product may vary from images.*
Additional MFG Notes on Timken LM11910 Single Cup LM11910-20024:
Specifications

Series: LM11900
Cone Part Number: LM11949
Cup Part Number: LM11910
Design Unit: Inch
Cage Material: Stamped Steel

Dimensions
d – Bore: 0.7500 in 19.05 mm
D – Cup Outer Diameter: 1.7810 in 45.237 mm
B – Cone Width: 0.6550 in 16.637 mm
C – Cup Width: 0.4750 in 12.065 mm
T – Bearing Width: 0.6100 in 15.494 mm

Abutment and Fillet Dimensions
R – Cone Backface “To Clear” Radius1: 0.050 in 1.270 mm
r – Cup Backface “To Clear” Radius2: 0.050 in 1.27 mm
da – Cone Frontface Backing Diameter: 0.93 in 23.5 mm
db – Cone Backface Backing Diameter: 0.98 in 25 mm
Da – Cup Frontface Backing Diameter: 1.65 in 41.90 mm
Db – Cup Backface Backing Diameter: 1.56 in 39.62 mm
Ab – Cage-Cone Frontface Clearance: 0.05 in 1.3 mm
Aa – Cage-Cone Backface Clearance: -0.01 in -0.3 mm
a – Effective Center Location3: -0.22 in -5.6 mm

Basic Load Ratings
C90 – Dynamic Radial Rating (90 million revolutions)4: 2280 lbf 10100 N
C1 – Dynamic Radial Rating (1 million revolutions)5: 8800 lbf 39100 N
C0 – Static Radial Rating: 7200 lbf 32000 N
Ca90 – Dynamic Thrust Rating (90 million revolutions)6: 1170 lbf 5220 N

Factors
K – Factor7: 1.94
e – ISO Factor8: 0.3
Y – ISO Factor9: 2
G1 – Heat Generation Factor (Roller-Raceway): 6.6
G2 – Heat Generation Factor (Rib-Roller End): 5.49
Cg – Geometry Factor10: 0.0441

1 These maximum fillet radii will be cleared by the bearing corners.
2 These maximum fillet radii will be cleared by the bearing corners.
3 Negative value indicates effective center inside cone backface.
4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
5 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
6 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
7 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
8 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
10 Geometry constant for Lubrication Life Adjustment Factor a3l.

NEO Surplus is not an authorized distributor, representative, reseller, or affiliated with Timken or any manufacturer, brand, or product. Items being sold are not covered under any manufacturer warranty. All trademarks, brand names and brands appearing herein are the property of their respective owners.

We do our best to get all the information in this listing correct. If you see an error or have any questions, please contact us.